Door Integration Guides
      Back to home
      1. Knowledge Base
      2. Integrations
      3. Door Integration Guides

      SAG Integration

      This is a technical guide for integrating the SAG access control system with LIKE MAGIC.

      Introduction

      On this page, you will find a comprehensive overview of the integration between SAG and our services. We will outline the necessary preconditions and setup requirements, including LockManager version compatibility and SAG Support coordination. This guide aims to ensure a seamless experience for both

       

      Table of Contents:

      1. Access Method
      2. Preconditions & Setup
      3. SAG System Credentials
      4. SAG Support Enablement
      5. Integration Limitations
      6. Conclusion
       

      1. Access Method

      Our integration with SAG provides PIN code access for guests:

      PIN Code Access

      Guests receive PIN codes for door access, offering a secure and reliable method of entry. The PIN codes are automatically generated and managed by LIKE MAGIC in coordination with the SAG system.

       

      2. Preconditions & Setup

      To ensure a successful integration, the following preconditions must be met and the setup correctly configured. 

      LockManager Version Requirements

      Critical requirement: Your SAG system must be running the current version of LockManager V7. This is mandatory for compatibility with LIKE MAGIC's integration.

      • Required Software: LockManager V7 (current version)

      • Compatibility: Older versions of LockManager are not supported and will not work with our integration

      3. SAG System Credentials

      You can provide the necessary SAG system credentials directly to LIKE MAGIC. Please gather the following information from your SAG LockManager system:

      Required Credentials

      Please provide the following credentials to your LIKE MAGIC onboarding contact:

      • Username: Your SAG system username for API access

      • Password: Your SAG system password for API access

      • ObjectId: The unique object identifier from your SAG system

      • InstallationId: The installation identifier from your SAG system

      How to Find These Credentials

      These credentials can typically be found in your SAG LockManager V7 system configuration. If you need assistance locating any of these values, please consult your SAG system documentation or contact your local SAG administrator.

       


      4. SAG Support Enablement

      Important: While you can provide the credentials directly, the integration will only function after SAG Support enables LIKE MAGIC as an integration partner for your system.

      Required Steps

      1. Contact SAG Support: Reach out to your SAG Support representative and request:

        • Enable LIKE MAGIC as an authorized integration partner for your system

        • Confirm your LockManager V7 version is compatible with third-party integrations

      2. SAG Support Configuration: SAG Support will:

        • Authorize LIKE MAGIC as an integration partner in your system

        • Enable the necessary API access permissions

        • Verify system compatibility and readiness

      3. Provide Credentials to LIKE MAGIC: Once SAG Support confirms enablement:

        • Share your SAG system credentials (username, password, objectId, installationId) with your LIKE MAGIC onboarding contact

        • LIKE MAGIC will test and configure the integration


      5. Integration Limitations

      Key Card Encoding

      Important: Our current SAG integration does not support encoding of key cards. If key card encoding functionality is required for your property, please reach out to LIKE MAGIC support to discuss available alternatives.

       

      6. Conclusion

      By following the steps outlined in this guide, you have successfully prepared your SAG system for integration with the LIKE MAGIC platform. This integration provides a streamlined, PIN-based access solution for your guests.

      Next Steps:

      1. Verify LockManager V7: Confirm you are running the current version of LockManager V7

      2. Contact SAG Support: Request integration partner enablement for LIKE MAGIC

      3. Gather Credentials: Collect your SAG system credentials (username, password, objectId, installationId)

      4. Coordinate with LIKE MAGIC: Share the SAG credentials with your onboarding contact after SAG Support confirms enablement

      Once SAG Support has enabled the integration and you have shared the necessary credentials with LIKE MAGIC, we will perform final verification and configuration to ensure your PIN-based guest access system is running smoothly.